EN
- Overview
- Recommended Products
Basic parameters
※ Aka wet concrete curing epoxy topcoat
※ Color Grey
※ Proportioning main agent: Curing agent =25:5
※ Construction brush coating, spraying, rolling coating can be
※ The composition is composed of wet curing epoxy resin, anti-rust pigment, auxiliary agent, solvent, curing agent, etc.
Product characteristics
※ Coating capability in wet environments: Wet cured epoxy coatings can be applied
directly on wet concrete surfaces or other wet substrates without waiting for
the substrate to dry completely, which greatly improves construction efficiency.
※ Excellent adhesion: Due to the ability of the paint to penetrate into the fine
gaps of the substrate and bind tightly to it, it has extremely strong adhesion,
ensuring that the coating will not fall off.
※ Chemical resistance and weather resistance: wet cured epoxy coating has excellent
acid and alkali resistance, weather resistance and chemical resistance, and can
maintain its protective performance in harsh environments for a long time.
※ Fast drying: Although it can cure in wet environments, wet curing epoxy coatings
usually have a faster surface drying and solid drying time, which helps speed
up the construction schedule.
※ High solid content and thick coating capacity: The high solid content of this Type of coating allows the thicker coating film to be applied at one time, reducing the number of construction passes and further improving the construction
efficiency.
Technical requirements
Product use
※ Widely used in Bridges, piers, piers, seaside projects, Marine anti-corrosion, oil, petrochemical pipeline, underground engineering, roof waterproof, floor engineering and all kinds of need corrosion resistance and waterproof protection occasions.
Construction parameters
Construction structure drawing:
Supporting scheme:
※ Wet curing epoxy primer + wet curing epoxy intermediate paint + wet curing epoxy top paint
Construction notes:
※ The temperature of the substrate must be above the dew point of 3℃, when the temperature of the substrate is below 5℃, the paint film is not solidified, and it is not suitable for construction.
※ In the high temperature season construction, easy to occur dry spray, in order to avoid dry spray can be adjusted to dry spray until the diluent.
※ This product should be used by professional painting operators according to the product packaging or the instructions in this manual.
Concrete surface:
※ Concrete surface should be flat, dry, no seepage floating and water. The base that has been polluted by grease and chemicals can be washed with detergent, lye or solvent, and can also be treated by fire baking, steam blowing, etc., but it must not damage the base.
Precautions
※ Products should be stored in a cool and ventilated place to prevent rain, direct
sunlight, avoid collision, need to isolate the fire source.
※ The construction site is strictly prohibited fireworks, painters should wear
glasses, gloves, masks, etc., to avoid skin contact and inhalation of paint mist.
※ All work of coating and use of this product must be carried out in accordance
with various relevant national health, safety and environmental protection regulations and standards.
※ If you have any questions about the use of this product, please contact our technical service department.
