EN
- Overview
- Recommended Products
Basic parameters |
|
※ Color Gray, iron red, white |
※ Ratio of main agent: curing agent =25:3 |
※ Construction brush coating, spraying, rolling coating can be |
※ The composition is composed of epoxy resin, anti-rust pigment, curing agent,etc. |
Product characteristics
Product characteristics
※ Excellent anti-corrosion properties, good mechanical properties and anti-penetration shielding properties, tough film, impact resistance
※ It has good adhesion, flexibility, wear resistance and sealing properties
※ Excellent water resistance, acid resistance, alkali resistance and solvent resistance
※ It has excellent interlayer adhesion with the rear paint film, and has a wide range of compatibility
Product use
※ It is suitable for the coating of storage tanks, containers, steel structures, steel pipes, offshore platforms, ships, port facilities and harsh anti-corrosion environment, as the bottom coating.
Supporting scheme:
※ Epoxy primer + epoxy iron intermediate paint/epoxy thick paste intermediate paint + acrylic polyurethane topcoat/polyurethane topcoat/polysiloxane topcoat/fluorocarbon topcoat/epoxy topcoat/alkyd topcoat/graphene topcoat/chlorinated rubber topcoat etc
Construction notes:
※ The temperature of the substrate must be above the dew point of 3℃, when the temperature of the substrate is below 5℃, the paint film is not solidified, and it is not suitable for construction.
※ In the high temperature season construction, easy to occur dry spray, in order to avoid dry spray can be adjusted to dry spray until the diluent.
※ This product should be used by professional painting operators according to the product packaging or the instructions in this manual.
Steel surface:
※ Must thoroughly remove oil, rust, etc., to achieve the rust removal standard Sa2.5, the roughness of 30um-75um; Adopt manual rust removal method, need to reach the rust removal standard St3 level.
Concrete surface:
※ Concrete surface should be flat, dry, no seepage floating and water. The base that has been polluted by grease and chemicals can be washed with detergent, lye or solvent, and can also be treated by fire baking, steam blowing, etc., but it must not damage the base.
※ Products should be stored in a cool and ventilated place to prevent rain, direct sunlight, avoid collision, need to isolate the fire source.
※ The construction site is strictly prohibited fireworks, painters should wear glasses, gloves, masks, etc., to avoid skin contact and inhalation of paint mist.
※ All work of coating and use of this product must be carried out in accordance with various relevant national health, safety and environmental protection regulations and standards.
※ If you have any questions about the use of this product, please contact our technical service department.
Precautions
※ Products should be stored in a cool and ventilated place to prevent rain, direct sunlight, avoid collision, need to isolate the fire source.
※ The construction site is strictly prohibited fireworks, painters should wear glasses, gloves, masks, etc., to avoid skin contact and inhalation of paint mist.
※ All work of coating and use of this product must be carried out in accordance with various relevant national health, safety and environmental protection regulations and standards.
※ If you have any questions about the use of this product, please contact our technical service department.
