EN
- Overview
- Recommended Products
Basic parameters |
|
※ Color Gray |
※ Proportioning main agent: Curing agent =25:3 |
※ Construction brush coating, spraying, rolling coating can be |
※ The composition is composed of epoxy phenolic resin, anti-rust pigment, curing |
agent, etc. |
Product characteristics
Product Features
※ Epoxy phenolic paint is a high performance paint that combines the advantages of epoxy resin and phenolic resin.
※ Corrosion resistance. Epoxy phenolic coatings have good corrosion resistance such as acid, alkali and salt water resistance, which can effectively protect metal surfaces from corrosion and extend the service life of equipment and structures.
※ Strong toughness and wear resistance. The paint has high strength and good toughness, can withstand mechanical scratching, impact, wear and other external forces, the paint film is tough, good wear resistance, strong adhesion.
※ High temperature resistance. Epoxy phenolic coating has good high temperature resistance, can maintain stability in high temperature environment, will not break, fall off and other phenomena, suitable for high temperature working environment.
※ Chemical resistance. The paint has good resistance to chemicals, oil, water and moisture resistance, and is suitable for harsh environment such as chemical atmosphere.
※ Electrical insulation performance. Epoxy phenolic coating s have good electrical insulation properties and are suitable for occasions where electrical insulation protection is required.
※ Sealing properties. The coating has good sealing performance, can effectively prevent the penetration of moisture, oxygen and other corrosive media, improve the anti-corrosion effect.
Product use
※ Suitable for storage tanks, containers, steel structures, steel pipes, offshore
platforms, ships, port facilities and harsh anti-corrosion environment.
Supporting scheme:
※ Epoxy phenolic primer + epoxy cloud iron intermediate paint/epoxy thick paste intermediate paint/epoxy phenolic intermediate paint + epoxy phenolic top paint/acrylic polyurethane top paint/polyurethane top paint/polysiloxane top paint/fluorocarbon top paint/epoxy alkyd top paint/graphene top paint/chlorinated rubber top paint, etc
Construction precautions:
※ The temperature of the substrate must be above the dew point of 3℃, when the temperature of the substrate is below 5℃, the paint film is not solidified, and it is not suitable for construction.
※ In the high temperature season construction, easy to occur dry spray, in order to avoid dry spray can be adjusted to dry spray until the diluent.
※ This product should be used by professional painting operators according to the product packaging or the instructions in this manual.
Steel surface:
※ Must thoroughly remove oil, rust, etc., to achieve the rust removal standard Sa2.5, the roughness of 30um-75um; Adopt manual rust removal method, need to reach the rust removal standard St3 level.
Concrete surface:
※ Concrete surface should be flat, dry, no seepage floating and water. The base that has been polluted by grease and chemicals can be washed with detergent, lye or solvent, and can also be treated by fire baking, steam blowing, etc., but it must not damage the base.
Precautions
※ Products should be stored in a cool and ventilated place to prevent rain, direct
sunlight, avoid collision, need to isolate the fire source.
※ The construction site is strictly prohibited fireworks, painters should wear
glasses, gloves, masks, etc., to avoid skin contact and inhalation of paint mist.
※ All work of coating and use of this product must be carried out in accordance with various relevant national health, safety and environmental protection regulations and standards.
※ If you have any questions about the use of this product, please contact our technical service department.
