EN
- Overview
- Recommended Products
Basic parameters |
|
※ Color Various colors |
※ Proportioning main agent: curing agent =25:5 |
※ Construction brush coating, spraying, rolling coating can be |
※ The composition is composed of epoxy resin, titanium dioxide, other pigments, |
fillers, auxiliaries, solvents and curing agent |
Product characteristics
Product characteristics
※ Has excellent anti-corrosion performance, can resist acid, alkali, grease and other chemical substances erosion, but also resistant to solvent, gasoline and salt water corrosion. This makes epoxy topcoats ideal for use in environments that require a high degree of corrosion protection, such as steel structure surfaces and concrete surfaces.
※ Epoxy topcoats are not only resistant to water, but also to erosion in acidic and alkaline environments. In addition, it is also very resistant to various solvents, and these properties allow the epoxy topcoat to maintain its performance in a variety of harsh environments.
※ It has strong resistance to microbial erosion and can prevent the damage of microorganisms to the coating. At the same time, its impermeability is also high, and it can effectively prevent water and other harmful substances from penetrating into the substrate.
※ It can be firmly attached to the substrate, and has good flexibility and heat resistance. It also has high wear resistance and can resist high-strength trampling and mechanical impact. In addition, the sealing properties of the epoxy topcoat are also very good, and it can effectively close the tiny pores on the surface of the substrate.
※ The paint film is tough and has good mechanical properties, such as impact resistance. At the same time, it also has good electrical insulation properties, suitable for occasions that require electrical insulation protection.
※ The weather resistance is relatively poor and it is easy to yellowing. Therefore, epoxy top paint is more suitable for metal protection in indoor environment, and not suitable for outdoor exposure environment.
Product use
※ For steel anticorrosive coating and concrete surface anticorrosive coating. Applied to the inner wall of oil tank coating, can be widely used in indoor and outdoor all kinds of light metal and cement structure surface, can be coated in different environments used in railway Bridges, high voltage transmission towers, containers, offshore drilling and oil production equipment, all kinds of vehicle chassis, heavy machinery, ships, chemical industry, equipment and pipelines, gas engineering gas holder. However, due to its poor weather resistance, it is not suitable for outdoor environment.
Supporting scheme:
※ Epoxy zinc-rich primer/epoxy primer/inorganic zinc-rich primer/graphene zinc powder primer + epoxy cloud iron intermediate paint/epoxy thick paste intermediate paint + epoxy top paint
Construction precautions:
※ The temperature of the substrate must be above the dew point of 3℃, when the temperature of the substrate is below 5℃, the paint film is not solidified, and it is not suitable for construction.
※ In the high temperature season construction, easy to occur dry spray, in order to avoid dry spray can be adjusted to dry spray until the diluent.
※ This product should be used by professional painting operators according to the product packaging or the instructions in this manual.
Steel surface:
※ Must thoroughly remove oil, rust, etc., to achieve the rust removal standard Sa2.5,the roughness of 30um-75um; Adopt manual rust removal method, need to reach the rust removal standard St3 level.
Concrete surface:
※ Concrete surface should be flat, dry, no seepage floating and water. The base that has been polluted by grease and chemicals can be washed with detergent, lye or solvent, and can also be treated by fire baking, steam blowing, etc., but it must not damage the base.
Precautions
※ Products should be stored in a cool and ventilated place to prevent rain, direct
sunlight, avoid collision, need to isolate the fire source.
※ The construction site is strictly prohibited fireworks, painters should wear
glasses, gloves, masks, etc., to avoid skin contact and inhalation of paint mist. ※ All work of coating and use of this product must be carried out in accordance.
with various relevant national health, safety and environmental protection regulations and standards.
※ If you have any questions about the use of this product, please contact our technical service department.
