Water-based fluorocarbon top paint

Basic parameters

Brand: Benzhou Coatings

Model No. : BZ-3-3

Color: Assorted

Matching ratio: Main paint: curing agent =10:1

Appearance: The surface is flat and smooth

Product features

Waterborne fluorocarbon coatings have excellent outdoor weather resistance. The ultra-high bond energy of C-F bond makes the coating have strong chemical stability, so it has excellent anti-ultraviolet degradation ability and super weather resistance.

Waterborne fluorocarbon coating dense film feel smooth, surface attachment can be washed with water, can also be wiped with diluent.

It can be diluted with tap water.All kinds of construction tools, equipment and containers can also be washed with tap water.Greatly reduced the coating cost.

The physical and mechanical properties of the coating are excellent.

It has good water resistance, oil resistance, solvent resistance, acid resistance, alkali resistance, seawater resistance, salt spray resistance and other properties

Product use

Suitable for automobile, ship, grid, machinery manufacturing, container, railway, bridge, boiler, steel structure and other industries.

It is suitable for metal anti-rust coating in industrial equipment, machinery manufacturing, hardware and electrical, household appliances and other industries.

Technical requirements

Construction parameters

The temperature of the substrate must be above 3 ° C above the dew point, and when the temperature of the substrate is below 5 ° C, the paint film is not solidified and it is not suitable for construction.

Strictly prohibit contact with oily substances, stir evenly before use, according to actual needs, appropriate water dilution, but generally add 0-10% water is good

Supporting scheme:

Waterborne fluorocarbon primer + waterborne fluorocarbon intermediate paint + waterborne fluorocarbon top paint

Construction structure drawing:

Steel surface:

Must thoroughly remove oil, rust, etc., to achieve the rust removal standard Sa2.5, the roughness of 30um-75um; Adopt manual rust removal method, need to reach the rust removal standard St3 level.

Concrete surface:

Concrete surface should be flat, dry, no seepage floating and water. The base that has been polluted by grease and chemicals can be washed with detergent, lye or solvent, and can also be treated by fire baking, steam blowing, etc., but it must not damage the base.

Precautions

Products should be stored in a cool and ventilated place to prevent rain, direct sunlight, avoid collision, need to isolate the fire source.

The construction site is strictly prohibited fireworks, painters should wear glasses, gloves, masks, etc., to avoid skin contact and inhalation of paint mist.

All work of coating and use of this product must be carried out in accordance with various relevant national health, safety and environmental protection regulations and standards.

If you have any questions about the use of this product, please contact our technical service department.

Package:

Component A: 20KG

Component B: 2KG

Transportation and Storage:

The products should be stored in a cool and ventilated place, prevent direct sunlight, and isolate the fire source, away from the heat source in the warehouse.

When the product is transported, it should be prevented from rain, sunlight exposure, collision avoidance, and should comply with the relevant regulations of the transportation department.

Safety protection

The construction site should have good ventilation facilities, painters should wear glasses, gloves, masks, etc., to avoid skin contact and inhalation of paint mist.

Fireworks are strictly prohibited on the construction site.