Water-based epoxy zinc-rich primer

Basic parameters

Water-based epoxy zinc-rich primer is composed of water-based epoxy resin, zinc powder, water, etc

Brand: Benzhou Coatings

Model No. : BZ-10

Color: Gray

Match: Main paint: curing agent =10:1

Appearance: The surface is smooth and smooth

Product features

It can be diluted with tap water.All kinds of construction tools, equipment and containers can also be washed with tap water.Greatly reduced the coating cost.

The coating has good adhesion to the wet substrate and good one-way permeability

The physical, chemical and mechanical properties of the coating are excellent

Product use

Suitable for automobile, ship, grid, machinery manufacturing, container, railway, bridge, boiler, steel structure and other industries.

It is suitable for metal anti-rust coating in industrial equipment, machinery manufacturing, hardware and electrical, household appliances and other industries.

Technical requirements

Construction parameters

The temperature of the substrate must be above 3 ° C above the dew point, and when the temperature of the substrate is below 5 ° C, the paint film is not solidified and it is not suitable for construction.

Strictly prohibit contact with oily substances, stir evenly before use, according to actual needs, appropriate water dilution, but generally add 0-10% water is good.

Construction structure drawing:

Steel surface:

Must thoroughly remove oil, rust, etc., to achieve the rust removal standard Sa2.5, the roughness of 30um-75um; Adopt manual rust removal method, need to reach the rust removal standard St3 level.

Concrete surface:

Concrete surface should be flat, dry, no seepage floating and water. The base that has been polluted by grease and chemicals can be washed with detergent, lye or solvent, and can also be treated by fire baking, steam blowing, etc., but it must not damage the base.

Precautions

Products should be stored in a cool and ventilated place to prevent rain, direct sunlight, avoid collision, need to isolate the fire source.

The construction site is strictly prohibited fireworks, painters should wear glasses, gloves, masks, etc., to avoid skin contact and inhalation of paint mist.

All work of coating and use of this product must be carried out in accordance with various relevant national health, safety and environmental protection regulations and standards.

If you have any questions about the use of this product, please contact our technical service department.

Packing:

Main paint: 20KG

Curing agent: 2KG

Transportation and storage:

The products should be stored in a cool and ventilated place, prevent direct sunlight, and isolate the fire source, away from the heat source in the warehouse.

When the product is transported, it should be prevented from rain, sunlight exposure, collision avoidance, and should comply with the relevant regulations of the transportation department.

Safety protection

The construction site should have good ventilation facilities, painters should wear glasses, gloves, masks, etc., to avoid skin contact and inhalation of paint mist.

Fireworks are strictly prohibited on the construction site.