Silicone heat resistant paint

Basic parameters

• Color The topcoat is various
• Construction brush, spray, roll paint can be applied
• The composition is composed of silicone resin, high temperature resistant pigment, high temperature resistant filler, auxiliary agent, solvent and so on.

Product characteristics

Product characteristics

• High temperature resistance. Silicone high temperature resistant coatings can maintain stability in extreme high temperature environments, and the temperature can reach 600℃.
• Resistant to chemical corrosion. This type of paint not only resists high temperatures, but also has excellent chemical resistance. They can resist the erosion of acid, alkali and other chemical media, and are suitable for the protection of chemical equipment and pipelines.
• Thermal oxidation stability. The silicone oxygen bond in the silicone resin gives the paint excellent thermal oxidation stability, making it difficult to decompose at high temperatures, thus extending the service life of the protected material.
• Weather resistance and UV resistance. Silicone high temperature resistant coating is not easy to yellow under strong ultraviolet irradiation, and has excellent weather resistance. This allows them to maintain good performance even in outdoor high temperature environments.
• Adhesion and mechanical strength. Silicone high temperature resistant coating and the surface of the object can form an interpenetrating network structure, with good adhesion and mechanical strength, such as abrasion resistance, impact resistance.

Product use

• Chemical industry, metallurgy, power plant. Silicone high temperature resistant coatings play an important role in industrial fields such as chemical industry, metallurgy and power plant. These fields often involve high temperature operating environments where equipment and pipes are susceptible to high temperatures and corrosive substances. Silicone high temperature resistant coatings can effectively protect these equipment and pipes from damage in high temperature and corrosive environments, thereby extending the service life of the equipment and ensuring the continuity of production.
• Blast furnace, heat exchanger, incinerator, heating furnace. Silicone high temperature resistant coatings are widely used in facilities such as blast furnaces, heat exchangers, incinerators, and heaters. These devices generate extremely high temperatures during operation, and silicone heat-resistant coatings are able to maintain their performance under these extreme conditions and prevent oxidation and corrosion on the surface of the equipment.

Supporting scheme:

• Inorganic zinc-rich primer + silicone high temperature resistant intermediate paint + silicone high temperature resistant top paint

Construction precautions:

• The temperature of the substrate must be above the dew point of 3℃, when the temperature of the substrate is below 5℃, the paint film is not solidified, and it is not suitable for construction.
• In the high temperature season construction, it is easy to occur dry spray, in order to avoid dry spray can be adjusted to dry spray until the diluent.
• This product should be used by professional painting operators according to the product packaging or the instructions in this manual.

Steel surface:

• Must thoroughly remove oil, rust, etc., to achieve the rust removal standard Sa2.5, the roughness of 30um-75um; Adopt manual rust removal method, need to reach the rust removal standard St3 level.

Concrete surface:

• Concrete surface should be flat, dry, no seepage floating and water. The base that has been polluted by grease and chemicals can be washed with detergent, lye or solvent, and can also be treated by fire baking, steam blowing, etc., but it must not damage the base.

Precautions

• Products should be stored in a cool and ventilated place to prevent rain, direct sunlight, avoid collision, need to isolate the fire source.
• The construction site is strictly prohibited fireworks, painters should wear glasses, gloves, masks, etc., to avoid skin contact and inhalation of paint mist.
• All work of coating and use of this product must be carried out in accordance with various relevant national health, safety and environmental protection regulations and standards.
• If you have any questions about the use of this product, please contact our technical service department.