EN
- Overview
- Recommended Products
Basic parameters
Color Various colors
Ratio main agent: curing agent =20:5
Construction brush coating, spraying, rolling coating can be
It is composed of polyurethane resin, oil and rust resistant pigment filler, auxiliary agent, solvent and polyisocyanate curing agent.
Product characteristics
※ With excellent oil resistance, it can keep its physical and chemical properties stable in the case of contact with oil substances, and will not be eroded or dissolved by oil.
※ With strong adhesion, it can be firmly attached to the surface of the substrate and is not easy to fall off. This is essential to ensure long-term protection and prevent corrosion.
※ Corrosion resistance. It has good corrosion resistance such as acid, alkali and salt water resistance, which can effectively protect the metal surface from corrosion and extend the service life of equipment and structure.
※ Strong toughness and wear resistance. The paint has high strength and good toughness, can withstand mechanical scratching, impact, wear and other external forces, the paint film is tough, good wear resistance, strong adhesion.
※ Electrical insulation properties. It has good electrical insulation properties and is suitable for occasions where electrical insulation protection is required.
Technical requirements
Product use
It can be used for bridge, ship, offshore platform, underwater coating, harbor facilities, automobile chassis exterior wall, etc., as anti-rust primer.
Construction parameters
Construction structure drawing:
Supporting scheme:
※ Polyurethane oil-resistant primer/epoxy zinc-rich primer/epoxy
primer/inorganic zinc-rich primer/graphene zinc powder primer + polyurethane oil-resistant intermediate paint/epoxy cloud iron intermediate paint/epoxy thick paste intermediate paint + polyurethane oil-resistant top paint
Construction precautions:
※ The temperature of the substrate must be above the dew point of 3℃, when the temperature of the substrate is below 5℃, the paint film is not solidified, and it is not suitable for construction.
※ In the high temperature season construction, easy to occur dry spray, in order to avoid dry spray can be adjusted to dry spray until the diluent.
※ This product should be used by professional painting operators according to the product packaging or the instructions in this manual.
Steel surface:
Must thoroughly remove oil, rust, etc., to achieve the rust removal standard Sa2.5, the roughness of 30um-75um; Adopt manual rust removal method, need to reach the rust removal standard St3 level.
Concrete surface:
Concrete surface should be flat, dry, no seepage floating and water. The base that has been polluted by grease and chemicals can be washed with detergent, lye or solvent, and can also be treated by fire baking, steam blowing, etc., but it must not damage the base.
Precautions
※ Products should be stored in a cool and ventilated place to prevent rain, direct sunlight, avoid collision, need to isolate the fire source.
※ The construction site is strictly prohibited fireworks, painters should wear glasses, gloves, masks, etc., to avoid skin contact and inhalation of paint mist.
※ All work of coating and use of this product must be carried out in accordance
with various relevant national health, safety and environmental protection regulations and standards.
※ If you have any questions about the use of this product, please contact our technical service department.
