Fluorocarbon primer

Basic parameters

Color Gray, iron red, white
Ratio of main agent: curing agent =25; 3
Construction brush, spray, roll coating can be applied
It is composed of fluorocarbon resin, DuPont titanium dioxide, anti-rust pigment fillers, additives, solvents and imported curing agent.

Product features

Excellent weather resistance and corrosion resistance, which is mainly attributed to the F-C bond on the fluorine resin molecular chain, which can effectively resist the degradation of ultraviolet light, so as to ensure that the paint film can maintain good luster and color under long-term exposure to external conditions.
Excellent corrosion resistance. Fluorocarbon series coatings have excellent chemical inertia, can resist acid, alkali, salt and other chemical substances erosion, thereby protecting the substrate from corrosion and oxidation.
Chemical resistance. It can withstand most acid, alkali, chemical gas and other erosion, and has extremely high chemical resistance to a variety of chemical substances.
Excellent adhesion. Fluorocarbon primer coating and matrix bonding force is strong, for the sandblasted steel surface has a very strong adhesion, the coating does not fall off, adhesion firm.
Physical and mechanical properties. The coating is hard and wear-resistant, with good toughness and bending resistance.

Technical requirements

Product use

Architectural decoration field. It is widely used in the field of architectural decoration. It can be used to paint the exterior walls, roofs and interior decoration of high-grade residential buildings, commercial buildings and industrial plants. Due to its weather resistance and pollution resistance, it is also widely used in urban landmark buildings and external structures such as highway guardrail.

Industrial anticorrosion field. It is widely used in Bridges, iron towers, outdoor large steel structure, road and bridge facilities and other important steel structure facilities, to protect the metal from rust, corrosion, and decorative two aspects of the role. In addition, fluorocarbon primer is also suitable for Marine and coastal steel structure coating, solvent resistance, acid and alkali, salt water, gasoline, diesel, strong corrosive solution and so on.

Automobile manufacturing industry. In the automobile manufacturing industry, fluorocarbon primer is used in automobile painting, especially high-end models, such as BBA, Porsche, etc., most of which use fluorocarbon materials. Fluorocarbon paint can increase the corrosion resistance and heat resistance of the body, and improve the color stability and weather resistance of the body coating.

Aerospace field. Fluorocarbon primers also have important applications in the aerospace sector. It can be used for anti-corrosion, anti-oxidation treatment of the surface of aircraft parts, such as fuselage shell, coated surface, etc. Electronic and electrical industry. In the electronic and electrical industry, fluorocarbon primer can improve the insulation performance and high temperature resistance of circuit boards and components, and ensure the safety and stability of electronic and electrical equipment.

Other fields. Fluorocarbon primers are also widely used in machinery manufacturing, chemicals, electronics and other industries.

Construction parameters

Construction structure drawing:

Supporting scheme:

Fluorocarbon primer + epoxy iron intermediate paint + acrylic polysiloxane top paint/acrylic paint/acrylic polyurethane top paint/polyurethane top paint/polysiloxane top paint/fluorocarbon top paint/epoxy top paint/alkyd top paint/graphene top paint/chlorinated rubber top paint, etc

Construction notes:

The temperature of the substrate must be above the dew point of 3℃, when the temperature of the substrate is below 5℃, the paint film is not solidified, and it is not suitable for construction.

In the high temperature season construction, easy to occur dry spray, in order to avoid dry spray can be adjusted to dry spray until the diluent.

This product should be used by professional painting operators according to the product packaging or the instructions in this manual.

Steel surface: Must thoroughly remove oil, rust, etc., to achieve the rust removal standard Sa2.5, the roughness of 30um-75um; Adopt manual rust removal method, need to reach the rust removal standard St3 level.

Concrete surface:

Concrete surface should be flat, dry, no seepage floating and water. The base that has been polluted by grease and chemicals can be washed with detergent, lye or solvent, and can also be treated by fire baking, steam blowing, etc., but it must not damage the base.

Precautions

• Products should be stored in a cool and ventilated place to prevent rain, direct sunlight, avoid collision, need to isolate the fire source.
• The construction site is strictly prohibited fireworks, painters should wear glasses, gloves, masks, etc., to avoid skin contact and inhalation of paint mist.
• All work of coating and use of this product must be carried out in accordance with various relevant national health, safety and environmental protection regulations and standards.
• If you have any questions about the use of this product, please contact our technical service department.
•