EN
- Overview
- Recommended Products
Basic parameters
Color Red
Ratio of main agent: curing agent =25:3
Construction brush coating, spraying, rolling coating can be
The composition iscomposed of epoxy resin, red lead (camphor), anti-rust pigment, auxiliary agent and solvent
Product Features
Excellent rust resistance. As the main anti-rust pigment, red lead can react with the metal surface to form a dense protective film, effectively isolating water and oxygen, thereby preventing the occurrence of rust.
With strong adhesion, it can firmly adhere to the metal surface. This allows the epoxy red lead primer to maintain stable performance even in harsh environments and is not easy to flake.
It not only has anti-rust function, but also has certain wear resistance and mechanical strength, which can effectively protect the metal surface from physical damage.
It has excellent water resistance, acid resistance, alkali resistance and solvent resistance, and can maintain long-term stability in a variety of harsh environments.
It has excellent interlayer adhesion with the rear paint film, and has a wide range of compatibility.
Technical requirements
Product use
It is suitable for painting storage tanks, containers, steel structures, steel pipes, offshore platforms, ships, port facilities and harsh anti-corrosion environment. Suitable for chemical plant, fertilizer plant, power plant, oil refinery, paper mill, sewage treatment plant and other anti-corrosion coating.
Construction parameters
Construction structure drawing:
Supporting scheme:
Epoxy red lead primer + epoxy cloud iron intermediate paint/epoxy thick paste intermediate paint + acrylic polyurethane finish/polyurethane finish/polysiloxane finish/fluorocarbon finish/epoxy finish/alkyd finish/graphene finish/chlorinated rubber finish, etc
Construction notes:
The temperature of the substrate must be above the dew point of 3℃, when the temperature of the substrate is below 5℃, the paint film is not solidified, and it is not suitable for construction.
In the high temperature season construction, easy to occur dry spray, in order to avoid dry spray can be adjusted to dry spray until the diluent.
This product should be used by professional painting operators according to the product packaging or the instructions in this manual.
Steel surface:
It is necessary to thoroughly remove oil and rust, etc., to achieve the rust removal standard Sa2.5, and the roughness reaches 30um-75um; Adopt manual rust removal method, need to reach the rust removal standard St3 level.
Concrete surface:
Concrete surface should be flat, dry, no seepage floating and water. The base that has been polluted by grease and chemicals can be washed with detergent, lye or solvent, and can also be treated by fire baking, steam blowing, etc., but it must not damage the base.
Precautions
Products should be stored in a cool and ventilated place to prevent rain, direct sunlight, avoid collision, need to isolate the fire source.
The construction site is strictly prohibited fireworks, painters should wear glasses, gloves, masks, etc., to avoid skin contact and inhalation of paint mist.
All work of coating and use of this product must be carried out in accordance with various relevant national health, safety and environmental protection regulations and standards.
If you have any questions about the use of this product, please contact our technical service department.
