Epoxy primer

Basic parameters

Color Gray, iron red, white

Ratio of main agent: curing agent =25:3

Construction brush coating, spraying, rolling coating can be

The composition is composed of epoxy resin, anti-rust pigment, curing agent,etc.

Product characteristics

Excellent anti-corrosion properties, good mechanical properties and anti-penetration shielding properties, tough film, impact resistance
It has good adhesion, flexibility, wear resistance and sealing properties
Excellent water resistance, acid resistance, alkali resistance and solvent resistance
It has excellent interlayer adhesion with the rear paint film, and has a wide range of compatibility

Technical requirements

Product use

Suitable for storage tanks, containers, steel structures, steel pipes, offshore platforms, ships, port facilities and harsh anti-corrosion environment of the bottom coating.

Construction parameters

Construction structure drawing:

Supporting scheme:
Epoxy iron red primer + epoxy cloud iron intermediate paint/epoxy thick paste intermediate paint + acrylic polyurethane topcoat/polyurethane topcoat/polysiloxane topcoat/fluorocarbon topcoat/epoxy topcoat/alkyd topcoat/graphene topcoat/chlorinated rubber topcoat etc
Construction notes:
The temperature of the substrate must be above the dew point of 3℃, when the temperature of the substrate is below 5℃, the paint film is not solidified, and it is not suitable for construction.
In the high temperature season construction, easy to occur dry spray, in order to avoid dry spray can be adjusted to dry spray until the diluent.
This product should be used by professional painting operators according to the instructions in the product packaging or this manual.
Steel surface:
Must thoroughly remove oil, rust, etc., to achieve the rust removal standard Sa2.5, the roughness of 30um-75um; Adopt manual rust removal method, need to reach the rust removal standard St3 level.
Concrete surface:
Concrete surface should be flat, dry, no seepage floating and water. The base that has been polluted by grease and chemicals can be washed with detergent, lye or solvent, and can also be treated by fire baking, steam blowing, etc., but it must not damage the base.

Precautions

Products should be stored in a cool and ventilated place to prevent rain, direct sunlight, avoid collision, need to isolate the fire source.

The construction site is strictly prohibited fireworks, painters should wear glasses, gloves, masks, etc., to avoid skin contact and inhalation of paint mist.

All work of coating and use of this product must be carried out in accordance with various relevant national health, safety and environmental protection regulations and standards.

If you have any questions about the use of this product, please contact our technical service department.