Epoxy ester topcoat

Basic parameters

Color Gray
Construction brush, spray, roll, dip
The composition is composed of epoxy ester resin, anti-rust pigment, auxiliary agent, solvent and so on.

Product characteristics

Epoxy ester primer can generally be used for dip coating
Excellent anti-corrosion properties, good mechanical properties, tough film, impact resistance
It has good adhesion, flexibility, wear resistance and sealing properties
Excellent water resistance, acid resistance, alkali resistance and solvent resistance

Technical requirements

Product use

Suitable for steel structure, concrete and other anti-corrosion fields, as well as inconvenient construction of the workpiece using dip coating process.

Construction parameters

Construction structure drawing:

Supporting scheme:
Epoxy ester primer + epoxy iron intermediate paint/epoxy thick paste intermediate paint/epoxy phenolic aldehyde intermediate paint/epoxy ester intermediate paint + epoxy phenolic aldehyde top paint/acrylic polyurethane top paint/polyurethane top paint/polysiloxane top paint/fluorocarbon top paint/epoxy alkyd top paint/graphene top paint/chlorinated rubber top paint/epoxy ester top paint, etc
Construction notes:
The temperature of the substrate must be above the dew point of 3℃, when the temperature of the substrate is below 5℃, the paint film is not solidified, and it is not suitable for construction.
In the high temperature season construction, easy to occur dry spray, in order to avoid dry spray can be adjusted to dry spray until the diluent.
This product should be used by professional painting operators according to the product packaging or the instructions in this manual.
Steel surface:
Must thoroughly remove oil, rust, etc., to achieve the rust removal standard Sa2.5, the roughness of 30um-75um; Adopt manual rust removal method, need to reach the rust removal standard St3 level.
Concrete surface:
Concrete surface should be flat, dry, no seepage floating and water. The base that has been polluted by grease and chemicals can be washed with detergent, lye or solvent, and can also be treated by fire baking, steam blowing, etc., but it must not damage the base.

Precautions

Products should be stored in a cool and ventilated place to prevent rain, direct sunlight, avoid collision, need to isolate the fire source.
The construction site is strictly prohibited fireworks, painters should wear glasses, gloves, masks, etc., to avoid skin contact and inhalation of paint mist.
All work of coating and use of this product must be carried out in accordance with various relevant national health, safety and environmental protection regulations and standards.
If you have any questions about the use of this product, please contact our technical service department.