EN
- Overview
- Recommended Products
- Color Gray, black; Assorted colors
- Proportioning primer: Main agent: Curing agent =25:3; Top coat: Main agent: curing agent =25:5
- Construction brush, spray, roll coating can be applied
- The composition is composed of epoxy resin, conductive material, pigment filler, auxiliary agent, solvent, etc., and curing agent.
- Product characteristics
- Electrical conductivity. Conductive coatings have good electrical conductivity and are able to effectively direct and release static charges, thus reducing the risk of fire or explosion due to static accumulation. Its surface resistivity can usually be3 adjusted between 1011 and 10 ohms to meet different application needs.
- Corrosion resistance. The coating also has excellent corrosion resistance and can resist the attack of a variety of chemical media, including brine, acid, alkali and salt spray. This makes it ideal for tanks and pipes that store various media such as crude oil, sewage, sea water, industrial water, gasoline, kerosene, diesel, jet fuel and gas.
- Wear resistance and impact resistance. The film formed by conductive coatings is tough and flat, with excellent wear resistance and impact resistance, which can maintain its integrity in harsh working environments and extend the service life of the equipment.
- Technical requirements
- Product use
- Crude oil, sewage, sea water, industrial water, gasoline, kerosene, diesel, jet fuel, gas and other storage tanks: conductive coating is suitable for the above various media of the storage tank inner wall anti-corrosion coating, can effectively prevent the corrosion of the storage tank inner wall, prolong the service life of the storage tank.
- Oil and gas pipelines: the coating is also suitable for anti-corrosion coating of the inner wall of oil and gas pipelines to ensure that the medium inside the pipeline will not cause corrosion damage to the pipe wall.
- All kinds of chemical equipment: conductive coating can also be used for anti-corrosion protection coating of all kinds of chemical equipment, especially in places that need to conduct electricity, such as crude oil and finished oil tank inner wall anticorrosive in the petroleum and petrochemical industry.
Construction parameters
Construction structure drawing:
-
Supporting scheme:
- Epoxy conductive paint primer + epoxy conductive paint intermediate paint + epoxy conductive paint top paint
Construction notes:
- The temperature of the substrate must be above the dew point of 3℃, when the temperature of the substrate is below 5℃, the paint film is not solidified, and it is not suitable for construction.
- In the high temperature season construction, easy to occur dry spray, in order to avoid dry spray can be adjusted to dry spray until the diluent.
- This product should be used by professional painting operators according to the instructions in the product packaging or this manual.
Steel surface:
- Must thoroughly remove oil, rust, etc., to achieve the rust removal standard Sa2.5, the roughness of 30um-75um; Adopt manual rust removal method, need to reach the rust removal standard St3 level.
Concrete surface:
- Concrete surface should be flat, dry, no seepage floating and water. The base that has been polluted by grease and chemicals can be washed with detergent, lye or solvent, and can also be treated by fire baking, steam blowing, etc., but it must not damage the base.
-
Precautions
- Products should be stored in a cool and ventilated place to prevent rain, direct sunlight, avoid collision, need to isolate the fire source.
- The construction site is strictly prohibited fireworks, painters should wear glasses, gloves, masks, etc., to avoid skin contact and inhalation of paint mist.
- All work of coating and use of this product must be carried out in accordance with various relevant national health, safety and environmental protection regulations and standards.
- If you have any questions about the use of this product, please contact our technical service department.
Basic parameters
