Chloro-sulfonated polyethylene topcoat

Basic parameters

Also known as chlorosulfonated topcoat

Various colors

Ratio of one or two components: Main agent: curing agent =20:5

Construction brush coating, spraying, rolling coating can be

The composition is composed of chloro-sulfonated polyethylene resin, anti-rust pigment, filler, auxiliary agent, solvent and so on.

Product characteristics

Corrosion resistance. Chloro-sulfonated polyethylene paint has excellent corrosion resistance and can resist the corrosion of a variety of chemical media.

Weather resistance and durability. The coating film molecular structure is saturated, there is no hair color gene, so it is resistant to ultraviolet radiation and has good stability. It can be used for a long time in the temperature range of -50°C to 120°C, and can also be used alternately in hot and cold, anti-aging and non-cracking.

Mechanical and physical properties. Chloro-sulfonated polyethylene coatings have good mechanical and physical properties, especially excellent elasticity and cold resistance. It has excellent physical properties, good elasticity, strong adhesion, good electrical insulation, ionic radiation resistance, wear resistance, color stability and other characteristics.

It has water resistance, acid and alkali resistance, chemical resistance and other properties.

Technical requirements

Product use

Not only suitable for indoor and outdoor all kinds of metal and concrete rust protection, but also especially suitable for railway Bridges, high voltage transmission towers, containers, offshore oil equipment, storage tanks, Bridges and large steel structure equipment protection.

Construction parameters

Construction structure drawing:

Supporting scheme:

Chloro-sulfonated polyethylene primer/epoxy zinc-rich primer/inorganic zinc-rich primer/cold spray zinc primer/graphene zinc powder primer/epoxy iron red primer + chloro-sulfonated polyethylene intermediate paint/epoxy cloud iron intermediate paint + chloro-sulfonated polyethylene top paint

Construction precautions:

The temperature of the substrate must be above the dew point of 3℃, when the temperature of the substrate is below 5℃, the paint film is not solidified, and it is not suitable for construction.

In the high temperature season construction, easy to occur dry spray, in order to avoid dry spray can be adjusted to dry spray until the diluent.

This product should be used by professional painting operators according to the product packaging or the instructions in this manual.

Steel surface:

Must thoroughly remove oil, rust, etc., to achieve the rust removal standard Sa2.5, the roughness of 30um-75um; Adopt manual rust removal method, need to reach the rust removal standard St3 level.

Concrete surface:

Concrete surface should be flat, dry, no seepage floating and water. The base that has been polluted by grease and chemicals can be washed with detergent, lye or solvent, and can also be treated by fire baking, steam blowing, etc., but it must not damage the base.

Precautions

Products should be stored in a cool and ventilated place to prevent rain, direct sunlight, avoid collision, need to isolate the fire source.

The construction site is strictly prohibited fireworks, painters should wear glasses, gloves, masks, etc., to avoid skin contact and inhalation of paint mist.

All work of coating and use of this product must be carried out in accordance with various relevant national health, safety and environmental protection regulations and standards.

If you have any questions about the use of this product, please contact our technical service department.