Anti-ozone and anti-ultraviolet fluorocarbon coatings

Basic parameters

• Color primer: Gray. Top coat: Various colors (usually white)
• Matching primer: Main agent: curing agent =25:3 Top coat: Main agent: curing agent =25:5
• Construction brush coating, spray coating, roll coating can be
• The composition is composed of drinking water grade resin, drinking water grade titanium dioxide, drinking water grade pigment fillers, auxiliaries, solvents and curing agent.

Product characteristics

Product characteristics

• Ozone resistance. Ozone is a strong oxidizing agent that accelerates the aging process of coatings. Anti-ozone fluorocarbon coating through special formulation design, enhance the resistance to ozone molecules, can effectively delay the coating aging process.
• Excellent UV resistance. Fluorocarbon coating because of its molecular structure contains fluorocarbon bond (F-C bond), the strength and stability of this bond makes fluorocarbon coating can effectively absorb and disperse ultraviolet radiation, reduce ultraviolet damage to the coating.
• Mechanical and mechanical properties. Ozone and ultraviolet resistant fluorocarbon anticorrosive coating has excellent mechanical and mechanical properties, elasticity, and can resist the leakage and corrosion caused by micro cracks in concrete.
• The coating is non-toxic, tasteless, low temperature curing fast, high solid content, no environmental pollution. The coating has excellent resistance to water, oil and chemicals. No pollution to drinking water, the product conforms to the "drinking water transmission and distribution water equipment and protective materials safety evaluation standards" (GB/T17219-1998).

Product use

• Used for steel or concrete corrosion prevention, beverage, beer, pharmaceutical, food, water industry storage tank, pipeline, warehouse wall protection. Protective coating for drinking water tank and drinking water conveying pipeline of ocean going ship.

Supporting scheme:

• Anti-ozone and anti-ultraviolet Fluorocarbon paint primer + anti-ozone and anti-ultraviolet fluorocarbon top paint

Construction notes:

• This product is like most zinc-rich paints, long-term exposure to the paint film will appear zinc salt, must be thoroughly cleaned before applying the next paint, otherwise it will affect the adhesion between layers.
• The temperature of the substrate must be above 3 ° C above the dew point, and when the temperature of the substrate is below 5 ° C, the paint film is not cured and should not be constructed.
• In the high temperature season construction, easy to occur dry spray, in order to avoid dry spray can be adjusted to dry spray until the diluent.
• This product should be used by professional painting operators according to the product packaging or the instructions in this manual.

Steel surface:

• Must thoroughly remove oil, rust, etc., to achieve the rust removal standard Sa2.5, the roughness of 30um-75um; Adopt manual rust removal method, need to reach the rust removal standard St3 level.

Concrete surface:

• Concrete surface should be flat, dry, no seepage floating and water. The base that has been polluted by grease and chemicals can be washed with detergent, lye or solvent, and can also be treated by fire baking, steam blowing, etc., but it must not damage the base.

Precautions

• Products should be stored in a cool and ventilated place to prevent rain, direct sunlight, avoid collision, need to isolate the fire source.
• The construction site is strictly prohibited fireworks, painters should wear glasses, gloves, masks, etc., to avoid skin contact and inhalation of paint mist.
• All work of coating and use of this product must be carried out in accordance with various relevant national health, safety and environmental protection regulations and standards.
• If you have any questions about the use of this product, please contact our technical service department.