Alkyd topcoat

Basic parameters

Aka alkyd enamel
Various colors
Proportioning single component
Construction brush, spray, roll coating can be applied
The composition is composed of alkyd resin, anti-rust pigment, filler, auxiliary agent, solvent and so on.

Product characteristics

Good rust resistance
Excellent adhesion and sanding
Good construction performance
Good oil resistance, water resistance, acid resistance
Good resistance to artificial aging (weather resistance)

Technical requirements

Product use

Widely used in steel structure, concrete surface.

Construction parameters

Construction structure drawing:

Supporting scheme:

Alkyd primer + alkyd intermediate paint + alkyd top paint

Construction notes:

The temperature of the substrate must be above the dew point of 3℃, when the temperature of the substrate is below 5℃, the paint film is not solidified, and it is not suitable for construction.

In the high temperature season construction, easy to occur dry spray, in order to avoid dry spray can be adjusted to dry spray until the diluent.

This product should be used by professional painting operators according to the product packaging or the instructions in this manual.

Steel surface:

Must thoroughly remove oil, rust, etc., to achieve the rust removal standard Sa2.5, the roughness of 30um-75um; Adopt manual rust removal method, need to reach the rust removal standard St3 level.

Concrete surface:

The surface of the concrete should be flat, dry, no seepage floating water and water. The base that has been polluted by grease and chemicals can be washed with detergent, lye or solvent, and can also be treated by fire baking, steam blowing, etc., but it must not damage the base.

Precautions

Products should be stored in a cool and ventilated place to prevent rain, direct sunlight, avoid collision, need to isolate the fire source.

The construction site is strictly prohibited fireworks, painters should wear glasses, gloves, masks, etc., to avoid skin contact and inhalation of paint mist.

All work on the coating and use of this product must be done in accordance with various relevant national health, safety and environmental regulations and standards.

If you have any questions about the use of this product, please contact our technical service department.