Acrylic topcoat

Basic parameters

Color Various colors

Construction brush, spray, roll paint can be applied

It is composed of acrylic resin, anti-rust pigment filler, auxiliary agent, solvent and so on.

Product characteristics

Quick drying. The paint film of acrylic topcoat dries quickly, which allows it to quickly form a protective film during construction, reducing construction waiting time and improving work efficiency.
Heat and weather resistance. Acrylic topcoats are excellent for their heat and weather resistance. It can be applied in lower temperature conditions, and it retains its properties after prolonged exposure to outdoor environments and is not prone to fading, chalking or cracking.
Chemical resistance. Acrylic topcoats have good resistance to chemicals, water, alkali, salt and oil, etc., and are able to maintain their corrosion resistance in a variety of harsh environments.

Technical requirements

Product use

Steel structure coating. Acrylic topcoat is widely used in the coating of steel structure, which can effectively protect steel from corrosion and extend its service life.

Mechanical equipment and instrument protection. Due to its good weather resistance and anti corrosion properties, acrylic topcoats are also used for the protection of machinery, equipment, instruments and plates.

Traffic vehicles and construction machinery. Acrylic topcoats have excellent weather resistance and are especially suitable for outdoor objects such as traffic vehicles and construction machinery.

Buildings and infrastructure. Acrylic topcoats can be used on Bridges, ships, offshore platforms, underwater coatings, harbor facilities, exterior walls of car chassis, etc., for use as an anti-rust primer.

Chemical anticorrosive coating. In the chemical industry, acrylic topcoats can be used as anti-corrosion coatings to protect facilities from chemicals.

Construction parameters

Construction structure drawing:

Construction precautions:

The temperature of the substrate must be above the dew point of 3℃, when the temperature of the substrate is below 5℃, the paint film is not solidified, and it is not suitable for construction.

In the high temperature season construction, easy to occur dry spray, in order to avoid dry spray can be adjusted to dry spray until the diluent.

This product should be used by professional painting operators according to the product packaging or the instructions in this manual.

Steel surface:

It is necessary to thoroughly remove oil and rust, etc., to achieve the rust removal standard Sa2.5, and the roughness reaches 30um-75um; Adopt manual rust removal method, need to reach the rust removal standard St3 level.

Concrete surface:

Concrete surface should be flat, dry, no seepage floating and water. The base that has been polluted by grease and chemicals can be washed with detergent, lye or solvent, and can also be treated by fire baking, steam blowing, etc., but it must not damage the base.

Precautions

Products should be stored in a cool and ventilated place to prevent rain, direct sunlight, avoid collision, need to isolate the fire source.

The construction site is strictly prohibited fireworks, painters should wear glasses, gloves, masks, etc., to avoid skin contact and inhalation of paint mist.

All work of coating and use of this product must be carried out in accordance with various relevant national health, safety and environmental protection regulations and standards.

If you have any questions about the use of this product, please contact our technical service department.