Acrylic primer

Basic parameters

Color Gray, iron red

Construction brush paint, spray paint, roll paint can be applied

The composition is composed of acrylic resin,anti-rust pigment filler,auxiliary agent, solvent and so on.

Product characteristics

Quick drying. The paint film of acrylic primer dries quickly, which allows it to quickly form a protective film during construction, reducing construction waiting time and improving work efficiency.
Heat and weather resistance. Acrylic primers are excellent for their heat and weather resistance. It can be applied in lower temperature conditions and retains. its properties after prolonged exposure to outdoor environments without fading, chalking or cracking.
Chemical resistance. Acrylic primers have good resistance to chemicals, water,alkali, salt and oil, etc., and are able to maintain their corrosion resistance in a variety of harsh environments.

Technical requirements

Product use

Steel structure coating. Acrylic primer is widely used in the coating of steel structure, which can effectively protect steel from corrosion and extend its service life.

Mechanical equipment and instrument protection. Due to its good weather resistance and anti-corrosion properties, acrylic primers are also used for the protection of machinery, equipment, instruments and plates.

Traffic vehicles and construction machinery. Acrylic primer has excellent weather resistance, especially suitable for outdoor use in traffic vehicles, construction machinery and other objects.

Buildings and infrastructure. Acrylic primers can be used as anti-rust primers for Bridges, ships, offshore platforms, underwater coatings, harbor facilities, automotive chassis exterior walls, etc.

Chemical anticorrosive coating. In the chemical industry, acrylic primers can

be used as anti-corrosion coatings to protect facilities from chemicals.

Construction parameters

Construction structure drawing:

Supporting scheme:

Acrylic primer + acrylic intermediate paint/epoxy cloud iron intermediate paint/epoxy thick paste intermediate paint + acrylic topcoat/acrylic polyurethane topcoat/polyurethane topcoat/polysiloxane topcoat/fluorocarbon topcoat/epoxy topcoat/alkyd topcoat/graphene topcoat/chlorinated rubber topcoat etc

Construction notes:

The temperature of the substrate must be above the dew point of 3℃, when the temperature of the substrate is below 5℃, the paint film is not solidified, and it is not suitable for construction.

In the high temperature season construction, easy to occur dry spray, in order to avoid dry spray can be adjusted to dry spray until the diluent.

This product should be used by professional painting operators according to the instructions in the product packaging or this manual.

steel surface:

Must thoroughly remove oil, rust, etc., to achieve the rust removal standard Sa2.5, the roughness of 30um-75um; Adopt manual rust removal method, need to reach the rust removal standard St3 level.

Concrete surface:

Concrete surface should be flat, dry, no seepage floating and water. The base that has been polluted by grease and chemicals can be washed with detergent, lye or solvent, and can also be treated by fire baking, steam blowing, etc., but it must not damage the base.

Precautions

Products should be stored in a cool and ventilated place to prevent rain, direct sunlight, avoid collision, need to isolate the fire source.

The construction site is strictly prohibited fireworks, painters should wear glasses, gloves, masks, etc., to avoid skin contact and inhalation of paint mist.

All work of coating and use of this product must be carried out in accordance

with various relevant national health, safety and environmental protection regulations and standards.